For screen reader problems with this website, please call512-476-35515 1 2 4 7 6 3 5 5 1Standard carrier rates apply to texts.
The MM850 supports 55" to 100" flat-panel TVs that weigh between 30 lbs to 110 lbs. The flat-panel TV must have M5, M6, or M8 threaded wall-mount inserts on the back that measure 200mm-600mm (horizontal) x 100mm-600mm (vertical). Spacers are also provided in case your TV has an irregular back-panel. There are gas spring adjustments that will need to be made to accommodate the specific weight of the TV (refer to installation instructions).
The MantelMount MM850 has a built-in motor that moves the mount and your TV up/down, in/out, and left/right with the press of a button on the included RF remote control, through voice commands using an Amazon Alexa device (sold separately), or via IP control from a home-automation system. Dual electronic actuators move the mount horizontally and vertically, and a multi-axis hub allows the dual actuators to perform the complex drop and swivel motion smoothly and quietly.
You can save up to two favorite TV positions that can be accessed from the included RF remote control. In addition, the mount system can be configured to move automatically to one of the preset locations when its senses your TV is powering on and then return to its upright and locked position when the TV turns off. The Auto-Lower Power Sensor (ALPS) monitors when the TV is turned on and lowers the MantelMount MM850 automatically to one of two preset positions and raises it when the TV is turned off.
An intelligent sensor tells the mount to retract when temperatures around the fireplace get too hot. This unique safety feature of the MantelMount MM850 will monitor the temperature above your fireplace at all times and raise the mount automatically if the heat behind the TV rises above 130°F.
The MantelMount MM850 comes with an RF remote control and has the ability to send commands to the mount even from other rooms in the house; it does not need to be pointing directly at the mount in order to control the mount. However, it is very important to operate the remote only when the mount is in eye sight to prevent accidents, harm, and damage. "Up" and "Down" buttons raise and lower the mount. "Left" and "Right" buttons swivel the mount left or right. The "Set", "M1", and "M2" buttons let you store up to two positions presets for easy recall. The "Home" button fully raises the mount to its recessed position.
The MantelMount MM850 even works with Amazon Alexa devices (sold separately - see Accessories Tab), so you can position your TV with a simple voice command.
The MM850's communication module integrates with 3rd-party controllers via IP over a hardwired Ethernet connection. Compatible 3rd-party home automation controllers include Crestron, Control4, and RTI. An Ethernet Cable must be plugged into the communication module for integration. There are two access holes in the Housing for the cable depending on the type of installation.
The MM850 comes with a flush-mount recessed box that fits between two 2"x4" studs (up to 34" OC) inside your wall. The center arm of the mount folds neatly into the box when the TV is in the raised position, leaving a mere 1.8125" gap between your flat-panel TV and the wall. The recessed housing measures 13.3125" (w) x 28.75" (h) x 3.625" (d). Horizontal braces are include to attach the recessed box to existing wall studs; the braces can even be located off-center to the housing to reach the nearest studs.
Brace extenders allow you to create enough room beneath your TV and above the MM850's handles to easily attach your soundbar speaker directly to the mount's horizontal brace, eliminating the need for any 3rd party sound bar attachment. Your soundbar will need mounting holes on the back that are spaced no wider than 28.5" apart and situated no higher than 2.5" from the bottom of the speaker.
The MantelMount MM850 comes with paintable covers that hide the wall-mount plate and hardware for a clean, neat, and professional looking installation. It also comes with cable ties and cable tie anchors to help manage your TV's power cord and connector cables.
|Product Weight (lbs.)||70|
|TV Size's up to (in.)||100|
|Weight Capacity (lbs.)||110|