Pro-Ject 6 PerspeX SB Clear Acrylic High-End Turntable

$2,689.95

At a Glance

The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminum cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields.

Proposition 65 Warning for California Residents

The ultimate sub-chassis turntable for the 21st century

The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminum cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic sub-chassis suspension system avoids parasitic noise normally caused by conventional spring mechanism. A supplied spirit level allows easy adjustment of the sub-chassis. A quiet running AC motor unit drives the platter’s outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change.

The resonance-optimized platter is a sandwich construction utilizing a fine-balanced medium density fibre platter and a 4 mm thick flat-ground layer of vinyl and a screw-down metal record clamp. It runs on an inverted bearing with stainless-steel axle carrying a ceramic ball/ plate bearing. The headshell and armtube of high-end tonearm 9cc Evolution are fashioned from a single piece of carbon-fibre. A conical armtube avoids standing wave reflections. An Inverted tonearm bearing comprises four hardened stainless tips in ABEC 7 spec ballraces.

Supplied either with or without a premium Quintet Blue cartridge, manufactured by the cartridge experts at Ortofon, it can be ready to play within a few minutes of unboxing. Supplied counterweights are suitable for cartridges weighing between 5-14 g. Also supplied in the box is our Connect-IT E RCA cables, a semi-balanced, low-capacitance cable with superior shielding that’s optimized for turntable use.

In the box:

6 PerspeX SB with or without Ortofon Quintet Blue Cartridge

Acrylic Plinth

Connect it E RCA Cable

Sub-chassis made from Corian with magnetic suspension

Dust cover

Acoustically inert sandwich construction of platter with combination of MDF and vinyl layer as mat

Record clamp

Inverted main bearing with ceramic ball/plate

Adapter for 7“ singles

Belt drive with AC motor with DC driven AC generator

Power supply, spirit level

Electronic speed control with 33/45 rpm switching

Pre-mounted 9" tonearm 9 cc Evolution

Tonearm bearings with ABEC 7 ballraces